Difficult-to-access locations
Terrain, distance, and limited ground access can slow teams down before they reach the operational area.
INDUSTRIAL UAV · WILDFIRE RESPONSE
Faster Response.Broader Reach.
Ransus Drone Multirotor for Forest and Land Fire Response Operations.
A modular drone platform designed to support firefighting operations and logistics delivery to difficult-to-access locations.
Specifications are based on the product brochure and may vary by configuration.
±177 kgMaximum takeoff weightDepending on configuration
80 kgPayload capacityAs stated in the brochure
30 L/minStandard flow rateUp to 40 L/min optional
5+Fisheye camerasPlus FPV camera
When Access Becomes an Operational Challenge
Wildfire operations often take place in terrain that limits the speed and reach of field teams. Aerial support needs to be designed around those conditions.
Equipment transportation
Hoses, firefighting equipment, and operational supplies must be moved to locations that are not always easily accessible.
Flexible aerial support
Teams need aerial support options that can be adapted to the requirements of an emergency response.
OPERATIONAL CONFIGURATIONS
One Platform. Two Mission Configurations.
Ransus Drone Multirotor uses a modular mission system. Firefighting and cargo modules are separate configurations; simultaneous use must be confirmed with the product team.
30 L/min standard40 L/min optionalAdjustable spray
Firefighting
Firefighting System
Modular firefighting spray system
A modular spray system to support aerial spraying requirements. The spray pattern is adjustable, with a standard nozzle flow rate of at least 30 L/min.
- Modular firefighting spray system
- Adjustable spray pattern
- Standard nozzle flow rate of at least 30 L/min
- Up to 40 L/min with an optional nozzle
Up to 80 kgModular hookOperational supply
Cargo
Cargo & Logistics System
Modular cargo lifting system
A modular lifting system with a hook to help transport firefighting equipment, hoses, and operational supplies to difficult-to-access locations.
- Modular lifting system with hook
- Payload capacity up to 80 kg as stated in the brochure
- Supports transportation of equipment and operational supplies
- Configuration follows the mission requirements
PRODUCT TECHNOLOGY
Designed to Support Field Operations
The technology is structured to help operators understand the environment, monitor the aircraft, and run missions with the right configuration.
01
Obstacle Avoidance
Millimeter-wave radar and LiDAR help read the surrounding environment during operations.
Not a guarantee against collisions.02
Visual Monitoring
At least five fisheye cameras and an FPV camera support visual monitoring.
03
Remote Operation
Touchscreen remote controller with RTK, 4G transmission, and dual-operator mode support.
Connectivity depends on network conditions at the site.04
Intelligent Battery System
Intelligent flight batteries with an air-cooled battery cooling system.
05
Field Charging Support
A multifunction inverter generator to support battery charging in the field.
06
Modular Mission System
Cargo and firefighting modules can be changed to match operational needs.
Technical Specifications
A summary of key specifications based on the available product brochure.
AA
Unmanned Aerial Vehicle (Drone) Multirotor
Multirotor for payload transport requirements.
- Function
- Multirotor and payload transport
- Maximum flow rate
- At least 30 L/min (standard nozzle); up to 40 L/min (optional nozzle)
- Obstacle avoidance sensor
- Millimeter-wave radar and LiDAR
- Monitoring system
- Multi-fisheye camera (at least 5 cameras) and FPV camera
- Maximum takeoff weight
- ±177 kg (depending on configuration)
BB
Remote Controller
Remote controller for the aircraft in item A.
- Screen
- LCD touchscreen at least 7 inches, resolution at least 1920 × 1200
- Screen brightness
- At least 1,400 cd/m²
- Operating time
- At least ±3.8 hours (internal battery); ±3.2 hours (external battery)
- Charging
- USB-C fast charging ≥65 W
- Operating temperature
- −20°C to 50°C
- Features
- Supports RTK module, 4G transmission, and dual operator mode
- In The Box
- 1 remote controller strap
CC
Battery Cooling (Air-Cooled Heat Sink)
Battery cooling during charging.
- Function
- Dissipates battery heat during charging so the battery remains stable and has a longer service life
- Cooling method
- Air-cooled
- Compatibility
- Flight battery in item D
DD
Intelligent Flight Battery
Flight battery for the aircraft in item A.
- Capacity
- At least 41,000 mAh
- Weight
- ±14.7 kg
- Charging time
- Maximum 9 minutes
EE
Multifunction Inverter Generator
Drone battery charging generator.
- DC charging power
- 42–61.6 V / at least 11,500 W
- Charging time
- ±8–9 minutes per flight battery (30%–95%)
- Fuel tank capacity
- At least 30 L
- Compatibility
- Flight battery in item D
- Dimensions
- ±757 mm × 704 mm × 677 mm
- Weight
- ±87 kg
- Fuel type
- RON 92 gasoline
- Engine oil
- SJ 10W-40
FF
Portable Charger 65 W
Remote controller charger.
- Input
- 100–240 V, 2 A, 50/60 Hz
- USB-C output
- 5 V/5 A, 9 V/5 A, 12 V/5 A, 15 V/4.3 A, 20 V/3.25 A, 5–20 V/3.25 A (PPS)
- USB-A output
- 5 V/2 A
- Maximum power
- 65 W
- Ports
- 2 × USB-C, 1 × USB-A
- Operating temperature
- 5°C to 40°C
GG
External Remote Controller Battery
External battery for the remote controller in item B.
- Capacity
- At least 4,920 mAh
- Voltage
- 7.6 V
- Energy
- At least 37.39 Wh
- Battery type
- LiPo
Specifications are based on the available product brochure and may depend on configuration. Confirm final specifications with the product team before procurement.
Download BrochureSYSTEM PACKAGE
One Operational Support System Package
The primary components listed in the product brochure system package.
Multirotor drone
With firefighting spray system
Touchscreen remote controller
Touchscreen controller for operations
Battery cooling unit
Air-cooled battery cooling system
Intelligent flight battery
Intelligent flight battery pack
Multifunction inverter generator
Field charging support
Portable charger
65 W portable charging unit
External controller battery
External remote controller battery
Cargo modules, additional firefighting accessories, and flight cases are shown separately in the brochure. Their inclusion in the commercial package must be confirmed.
Package contents may vary depending on the final quotation.
Support for a Range of Operational Needs
The following contexts describe potential applications of the platform, not customer claims or verified deployment records.
01
Government & disaster management
Government & Disaster Management
Support for emergency response operations and logistics distribution in areas that require aerial assistance.
02
Forestry & plantations
Forestry & Plantation Operations
Support for activities in remote or difficult-to-access areas with limited ground access.
03
Firefighting & emergency teams
Firefighting & Emergency Teams
Support for aerial spraying requirements and delivery of operational equipment.
FAQ
Frequently Asked Questions
Concise information to help procurement and operations teams understand the product.
Contact Our TeamRansus Drone Multirotor is a modular multirotor UAV platform designed to support forest and land fire operations, including firefighting needs and logistics delivery to difficult-to-access locations.
The firefighting configuration uses a modular spray system with a standard nozzle flow rate of at least 30 L/min and an optional nozzle up to 40 L/min. The cargo configuration uses a modular lifting system with a hook to carry equipment and operational supplies. They are separate configurations; simultaneous use must be confirmed with the product team.
The product brochure states a payload capacity of up to 80 kg, depending on the configuration used. Confirm the final configuration with the product team before procurement.
The standard nozzle has a flow rate of at least 30 L/min. With the optional nozzle, the flow rate can reach up to 40 L/min as stated in the product brochure.
The main package includes one multirotor drone with a spray system, one touchscreen remote controller, one air-cooled battery cooling unit, two intelligent flight batteries, one multifunction inverter generator, one 65 W portable charger, and one external remote controller battery. Final contents follow the quotation.
The platform uses a modular mission system. Specific requirements should be discussed with the product team to confirm the configuration, accessories, and operational limitations.
Open the Contact page via the button provided on this page. The team will follow up to understand your requirements and arrange an appropriate demonstration step.
It is helpful to include your organization profile, operational context, location of use, preferred configuration, expected implementation timeline, and any other support requirements. The product team will confirm the technical details and quotation scope.
NEXT STEP
Prepare Operational Support for Difficult-to-Access Areas.
Discuss operational requirements, system configuration, and implementation plans for Ransus Drone Multirotor with our team.